Centrifugal Spray Dryer
Centrifugal Spray Dryer
Air is filtered (initial + medium efficiency) and heated, then enters the air distributor at the dryer top and spirals uniformly into the chamber. Liquid feed is atomized into a fine mist by a high-speed centrifugal atomizer and contacts the hot air co-currently; 95-98% of moisture evaporates within seconds. Finished powder is collected continuously from the bottom of high-efficiency cyclone separators while exhaust gas is discharged via the induced draft fan.
Features:
1. Centrifugal atomizer with frequency control for fine adjustment.
2. Two-stage cyclone separation plus bag filter for high collection rate.
3. Suitable for heat-sensitive pharmaceutical materials.
Technical Data:
| Model | SED-5PG-A | SED-20PG-A | SED-25PG-A | SED-30PG-A | SED-40PG-A | SED-200PG-A |
| Evaporated Capacity (kg/hr) |
5 | 20-35 | 25 | 30-35 | 40 | 200 |
| Electrical Heater (kW) |
24 | 81 | / | 126 | / | / |
| Rotating Speed (rpm) | 25,000 | 15,000-16,000 | 25,000 | 25,000 | 25,000 | 15,000-18,000 |
| Dia. of the Atomizing Disk (mm) |
50 | 50 | 50 | 50 | 50 | 4000 |
| Operating Temperature (℃) | 350 | 160-180 | / | 160 | 120 | 160-180 |
Applications:
1. Spray drying of pharmaceutical solutions, emulsions and suspensions.
2. Production of powder, granule or fragmented solids from liquid feed.
3. Drying of food / dairy / nutraceutical liquids.
4. Drying of dyes, pigments, ceramics, fine chemicals.
5. Pilot-scale spray drying R&D.
Innoval Pharma
Product Categories
Contact Us
Related Product
